Polyaluminium chloride (PAC) has six colors! What's the difference?
The polyaluminium chloride sold on the market is quite miscellaneous, because each manufacturer's production process and raw materials are different, and the color produced is also different. Generally, there are six colors of polyaluminium chloride, including white, light yellow, golden yellow, brown, brown, and coffee. Here are six different colors for different purposes.
Differences of six PACS
1. White polyaluminium chloride
The newly developed new water purification material is widely used in food, drinking water, urban water supply, precision manufacturing water purification, paper industry, medicine, sugar refining, cosmetics additives, daily chemical industry, etc., with very high purity and the highest price.
2. Light yellow polyaluminium chloride
The medium and high series products, next to white polyaluminium chloride, are mainly used for drinking water treatment, in which the content of heavy metals is strictly limited, especially the drinking water grade polyaluminium chloride products produced by us, the water treated with it is clear and free of precipitation, the content of Al2O3 is about 30 (± 0.5), the powder is fine, the particles are uniform, the flocculation effect is good, the purification is efficient and stable, and the dosage is small Low cost, is a long-term cooperation of major water plants dedicated water treatment flocculant.
3. Golden yellow polyaluminium chloride
It is the most widely used polyaluminium chloride in the market at present. It is an efficient flocculant for sewage treatment, with good flocculation effect. Therefore, it is the best choice for industrial water supply, industrial wastewater, industrial water circulation and urban sewage treatment.
4. Brown, brown and coffee polyaluminium chloride
It is a kind of water treatment product produced according to the special requirements of individual customers for water treatment, in which the iron content is higher than other polyaluminium chloride product series, so the color is darker than golden yellow. For low temperature, low turbidity and high algae sewage, it is mainly used for drinking water, urban water supply, industrial water purification and other aspects of treatment.
Operating storage considerations:
1. In operation, the water purification process of polyaluminium chloride is generally divided into three stages. The three stages are coagulation stage, flocculation stage and sedimentation stage. In the coagulation stage, when the liquid medicine is injected into the coagulation vessel and the raw water is quickly coagulated, micro alum will form in a very short time. At this time, the water body becomes more turbid, which requires that the water flow can produce intense turbulence. Then the PAC enters the flocculation stage, which is the process of alum growth and coarsening. Appropriate turbulence degree and enough residence time (10-15min) are required. At the later stage, a large number of alum clusters can be observed to sink slowly, forming a clear surface layer.
When the flocculant is in the settling stage, it is the settling process of the flocculant in the settling tank. The water flow is required to be slow. In order to improve the efficiency, the inclined tube or plate settler is generally used. A large number of coarse alum flowers are blocked by the inclined tube (plate) wall and deposited at the bottom of the tank. The upper water is clear water, and the remaining alum flowers with small particle size and small density slowly decline while continuing to collide with each other, At the later stage, the residual turbidity remained unchanged.
2. PAC must be stored in a dry, moisture-proof and heat-resistant place (< 80 ℃ do not damage the package, the product can be stored for a long time).
3. Polyaluminium chloride products must be dissolved before use, and corrosion-resistant materials shall be used for dissolution equipment and dosing facilities.
4. The effective storage period of liquid products and solid products of polyaluminium chloride is half a year and two years respectively. The solid products can still be used after being damped.
Shaanxi United Xingchuang International Co., Ltd. Specializes in water treatment chemicals & food additives, such as Polyacrylamide, poly aluminium chloride, poly ferric sulfate water treatment, dextrose in food, citric acid food additive and so on.
Tel:0086-29-81501976
WhatsApp/Wechat:1829216061
Email:info@lxcgj.com
Website: www.lxcgj.com
Linkedin: https://www.linkedin.com/in/sally-sun-%E2%86%92-water-treatment-chemicals-food-additive-abb2b8185/
2019 12/13